307 High-Speed Stencil Cleaning Machine - Synergies Machinery（Shenzhen）Co.,Ltd.

Parameters

Main features

Integrated cleaning and drying, requiring no manual handling;
Water-based cleaning process, no flash point or ignition point, safe and reliable;
Multiple water cleaning methods, combining localized ultrasonic waves, high-pressure water, atomized water, and compressed air with programmed control;
Highly environmentally friendly, solvent water and rinsing water are recycled, and the entire machine's power consumption is less than 10KW.

Cleaning operation interface

Cleaning methods and techniques:

This equipment is an industry first, featuring two cleaning heads, one at the front and one at the rear, which clean the steel mesh simultaneously. In addition, it employs multiple cleaning methods to effectively achieve efficient cleaning and drying.

Constant-temperature solvent rinsing — quickly removes chemical impurities from the stencil surface and opening areas;
Localized ultrasonic cleaning — removes stubborn, hardened solder paste from the stencil opening areas;
Pure water rinsing — removes residual solvent from the stencil surface and opening areas;
High-pressure fan air shower — quickly removes residual liquid from the stencil surface and opening areas, followed by automatic air drying.

Applicable Stencils & Basic Parameters

Compatible with various stencil specifications on the market
Dimensions: 1460(L)*1160(W)*1820(H)
Weight: 550KG
Water Tank Capacity: 15.8 gallons
High-Pressure Cleaning Heads: 2
Cleaning Mode Selection: Single Cleaning, Quick Clean, Fine Cleaning available
Cleaning Speed: Computer controlled
Oil-Water Separator: Compressed air oil-water separator (recommended to replace annually)
Filter Element: 0.005mm food-grade PP filter cotton (recommended to replace weekly)
Air Source: 0.6Mpa
Voltage: AC120V

Cleaning parameters

Applicable steel mesh sizes	736 (L) x736 (W) x45mm (H) maximum
Maximum volume of solvent tank	6.6 gallons
Maximum capacity of the rinsing water tank	15.8 gallons
Cleaning pressure	<28kg/cm²
Cleaning method	Symmetrical complementary dual spray cleaning Localized ultrasonic vibration cleaning Double air-cut constant temperature drying
Ultrasonic cleaning time	2-5minutes
Ultrasonic cleaning time	1-3minutes
Air drying time	1-3minutes
External gas source	0.45-0.7 (Mpa)
Power	7.8kw
Gas consumption	(150-350) L/min
Exhaust port size	220x220mm maximum
Board insertion method	Manual door, with provisions for automatic AGV material cart connection
Cleaning mode	Quick wash and deodorizing wash modes are available

Intelligent & Eco-friendly Value

Can automatically connect to AGVs, with multiple steel meshes operating in parallel, achieving unmanned operation from the production line to the cleaning room;
Integrated cleaning and drying, automatically uploading MES data;
Environmentally friendly water-based solvent, offering excellent cost-effectiveness;
Ultra-low energy consumption, with a total power consumption of less than 8KW (compared to competitors with power consumption greater than 20KW);
Computer automatically generates reports for more intuitive viewing;
Automatic cleaning of defective stencils ensures the cleaning quality of each stencil before it goes online.